Alabine Svb Series Imd Ink
| Price : | Price Negotiable |
| Minimum Order : | 1000 (bag/bale/pack/packet) |
| Product Status : | New |
| Sample Available : | yes |
| Shipment Terms : | Negotiable |
| Payment Mode : |
T/T,cash,MoneyGram |
| Categories : | Chemicals, Paint & Coating |
| Posted By : | Aco.amen Chemical Technology Ltd. |
Description
Ⅰ、Description
ALABINE SVB series inks, which prepared with special mixed-resin, extra fine fillers and pigments, and so on, are not only feeling fine and smooth, but also of good leveling and printability. The after-treatment on the presswork is feasible, such as punching, drilling, cutting, etc. The film is alcohol resistant， chemical resistant and sterilization resistant.
Ⅱ、Recommended Application
◆Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, metallic material, stone, marble, glass, etc.
◆ Recommended for: Windows screens, the phone keypad, the phone shell, etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater and make sure non-dust, non-grease. To dilute the Ink with 3-20% ALATIVE SR6 thinner（In order to regulate the drying rate of ink , please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SN10 (15-25%, to total) activator completely and then is ready.
Mesh count: 70T to 180T
Drying: Air dry in 12-24 hours, or forced dry at 120-150℃in about 40 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 1kg/can, 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALABINE SVB Series Inks)
| Substrate | Printing Inks | Remark |
| Harden Acrylic Board | ALABINE SVB-223 + ALATIVE SN10（5:1） | 70OC heat cure in 45 minute, Then more than one week later, About 25OC |
2, Test Result of the Film (ALABINE SVB Series Inks)
| Item | Test Method | Result |
| Adhesive Force | Cross cut, Peeling test with adhesive tape | 100/100 Pass |
| Rigidity | Angle 45O, 1200g, Pencil hardness | 2H-3H |
| Water Resistance | Water immersion in five weeks | No Effect |
| Acid Resistance | Immersion 30% H2SO4 aqueous solution in 10 hours | No Effect |
| Alcohol Resistance | 1200g, Back and forth wipe 100 times with alcohol cloth | No Effect |
| Xylene Resistance | 1000g, Back and forth wipe 50 times with xylene cloth | No Effect |
| Gasoline Resistance | 1000g, Back and forth wipe 50 times with gasoline cloth | No Effect |
| Abrasion Resistance | 500g, Back and forth scrape 500 times with eraser | No Effect |
| Weatherability | Back printing, Accelerated exposing aging test | 800 hr |
| Punch Tolerance | Drill hole, Cutting, Stretch or punch (Range 3-5 mm) | No Effect to Connectivity |
 |
|
