| General Specification--KT series | |
| | | | |
| Specification | KT150 | |
| Power Output Level 1kHz, THD+N=0.1% | RMS@8ohm stereo | 150W+150W | |
| RMS@4ohm stereo | 225W+225W | |
| Phase response | (1W, 20Hz-20kHz at 8ohm) | ±10° | |
| Total Harmonic Distortion (THD+N) 20Hz~20kHz, Half Power | | ﹤0.1% | |
| Frequency Response | 1W/ 8ohm | 20Hz-20KHz-1dB@1KHz±1dB | |
| Slew Rate | | 25V/μs | |
| Intermodulation Distoration (IMD) 60Hz:7kHz, 4:1, Half Power | | ＜0.03% | |
| Channel Separation | Half Power, RL=8ohm, 1kHz Vol.max., input 600ohm shunt | >60dB | |
| SN Ratio | | 95dB | |
| Input Sensitivity(Vol.max) | AUX Input | 250mV | |
| MIC Input | 15mV | |
| Output Sensitivity(Vol.max.) | REC Output | 1.0V | |
| AUX Output | 0.775V | |
| PARALLAL Output | 1.2V | |
| Gain | TREBLE Gain | ±10dB(10K) | |
| MID Gain | ±5dB(2K) | |
| BASS Gain | ±10dB(100HZ) | |
| Input Impedance | | 47K ohm/AUX, 2K ohm/MIC | |
| Input＆Output Connectors | Per channel | Female &male XLR (pin 2+, configurable for pin3+, groung 1+) | |
| Output Connectors | Per channel | 2-way binding posts or speakon connectors | |
| Protection Circuit | | SHORT CIRCUIT PROTECT, OVER LOAD PROTECT, DC PROTECT, SOFT START, HIGH TEMPERATURE PROTECT LIMITER. | |
| Class | | AB | |
| Fuse | | 3A | |
| Power Supply | | 220V, 50Hz | |
| Cooling | | Two individual cooling fan controlled by temperature | |
| Dimensions(W×H×D) | | W548mm×H143mm×D467mm | |
| Weight(Kg) | | 6 | |
| | | | |
| | | |
| | | |
