A6 6000mah Portable Media Power

Name：A6 6000mAh Portable media power（Compatible AppleLGSONYPSP..）

I.Technical Features

Bettery Cell Type OCEANSUN 805066P 6.66Wh

Nominal Voltage 3.6V

Standard Charge Voltage 5V±0.2V DC

Standard Charge Current 1200mA

Stop Charging Current 120mA

Just Charging Mobile Power 3～4h

Charging Mobile Power and Mobilephone 7～8h

Charge Manage IC Protection

Li-ION IC Protection 4.25V±0.025V

Delay time for charge protection ≤2S at 25℃

Unload 5.0V±0.2V DC

Light Load（200mA） 5.0V±0.2V at 200mA

Standard Load（500mA） 5.0V±0.2V at 500mA

Heavy Load（1000mA） 5.0V±0.2V at 1000mA

Discharge current 500mA

Over Current Protection 1.5A～2.5A

Short Circuit Protection OK

Delay time for overcharge protection ≤50mS at 25℃

4Delay time for overcurrent protection ≤20mS at 25℃

Delay time for short circuit protection ≤20mS at 25℃

Internal resistance of battery ≤150mΏ

Convert Efficiency ≥80%

Output Wave ≦200mV（500mA）

Power consumption of protection circuit ≦100uA

Cycle life ≥500 Cycles （Retention：≥80%）

II. Use Instruction

1.In normal times, there is one LED light on which means the capacity is less than 30%. And when one LED light shiny, that means the mobile charger is low power. The mobile charger need to be charge.Please connect your mobilephone and mobile charger when your mobilephone need to be charge.And please press the key about 1S.Without using it, you should charge it until full and put it into safety environment.

Standard charge

2.Please use standard 5V charger to charge this product。Charging the cell initially with constant current at 600mA and then with constant voltage at 4.20V till charge current declines to 60mA at 25℃～30℃.

Battery Capacity as Shipment, Capacity of battery pack shipment is more than 50%.

3. Battery failure-protection mechanism

When battery’s discharge voltage is lower than （2.5V±0.1V），the protection IC will automatically cut off the discharge circuit in order to prevent battery overdischarge. Remove the load and restore the battery by charge activating.

4.When battery’s charge voltage is more than （4.25V±0.05V），the protection IC will automatically cut off the charge circuit so as to prevent the battery from overcharge.

5.When external load’s discharge current is more than （1.5A～2.5A）, the protection IC will automatically cut off the discharge circuit in order to prevent the battery from damage caused by heavy-current discharge. Remove the load and restore the battery by charge activating.

Accessories：

1. power 1

2. User manual 1

3. DC3.5 70CM connecter 1

4. Micro 5Pin connecter 1

5. Nokia DC2.0 connecter 1

6. Samsung S20Pink connecter 1

7. Lg connecter 1

8. Sony Ericsson connecter 1

9. PSP connecter 1

10.Mini 5Pin connecter 1