Automotive Sensor Simulator Tester Oas71

Email:roger(at) yeson-tech(doc) com
MSN: yeson-roger (at) hotmail (doc) com
Skype:yeson-roger

Measure the signals of automotive sensors
Allow simulation of most sensorand computer management components
check basic ECU operation
Eliminate unnecessary replacement of non-defective sensors
Features
Measure the signals of automotive sensors
The most complete hand held diagnostic tester for sensors, wiring, connectors and on-board computers
DC voltage, lambda, frequency and pulse signals can be measured
Digital display shows actual output of signals
Measures any voltage AC or DC, resistance or frequency output
Allows Simulation of most Sensor and computer managemeng omponents
Simulating temperature sensors, throttle potentiometers, switches, air
flow meters and lembda/oxygen srnsors
Features AC voltage output to simulate vehicle speed sensors(vss),
CAM, CRANK, and ignition reluctors
Simulates actual working condition of any sensor without having to remove it
from the vehicleA.B.S., Crank, Can, Coolant, Oxygen, MAP, MAF, MAT, VSS, etc
Cheeks basic ECU operation
Controlling the signals being produced allows you to check ECU response and
operation.This prevents mis-diagnosis where the fault may lie in the ECU itself
or in the wiring between the component and the ECU.Works independently or with
any scan tool ever made
Can be used on any domestic or import vehicle
Eliminates unnecessary replacement of non-defective sensors
Can drive computer into"open or closed loop."
SPECIFCATIONS
Simulate Signal
Range
Function
DC Voltage
0-1V
Simulating lambda/oxygen sensors
0-5V
Simulating DC signal of sensors
0-12V
Resistance
0-5K
Simulating temperature or resistance sensors
0-200K
Frequency SignalV/Duty/Hz
0-5v 10-90% 10-4KHz
Simulating frequency signal sensors
0-12V 10-90% 10-4KHz
Test Function
Range
Basic Accuracy
DC Voltage
400mV, 4v , 40v, 400v, 1000v
(0.5%+3d)
AC Voltage
400mV, 4v , 40v, 400v, 750v
(0.8%+3d)
DC Current
40mA, 400mA, 10A
(1.2%+3d)
AC Current
40mA, 400mA, 10A
(1.5%+3d)
Resistance()
400, 4K, 40K, 400K, 4M, 40M
(1.0%+3d)
Capacitance
40nF, 400nF, 4F, 40F, 100F
(5.0%+3d)
Frequency
10Hz-10MHz
(0.5%+3d)
Duty cycle
0.1%-99.9%
(2.0%+3d)
Diode test and Audible Continuity test
Test current:10.6mA
>60 Buzzer sounds