Jgd Flexible Rubber Pipe Connector
| Price : | ＄5.00 |
| Quantity : | 2000 () |
| Minimum Order : | 10 |
| Product Status : | New |
| Sample Available : | yes |
| Payment Mode : |
Cash,Bank Transfer,L/C |
| Categories : | Machinery, Pipe & Tube |
| Posted By : | Gongyi Xinli Pipeline Facility Co., Ltd |
Description
Detailed description of rubber pipe connector
Brief introduction:
Rubber joint is composed of inner layer, polyamide fiber cord fabric, outer layer rubber and lapped joint flange,
it have many advantage such as high temperature and pressure resistance, high-flexibility reduce structural noise strong shock absorption and easy installation, extensively used in the water supply,
drainage cyclic water air conditioning paper making petroleum chemical industry, pump and duct fan pipeline system
Technical parameters
| Model Item | JGD-1 | JGD-2 | JGD-3 |
| Working pressure Mpa (kgf/cm2) | 1.0(10) | 1.6(16) | 2.5(25) |
| Explosion pressure Mpa (kgf/cm2) | 2.0(20) | 3.0(30) | 4.5(45) |
| Vacuum Kpa (mm/Hg) | 53.3(400) | 86.7(650) | 100(750) |
| Applicable Temperature ℃ | -15℃-115℃(-30℃-250℃ under special conditions) | ||
| Applicable media | Water, oil, gas, steam, etc. | ||
Appliability :
1. Installation of out of displacement limit is strictly prohibited.
2. Installing the bolt should be symmetrical and gradually tightening in case of partial leakage.
3 when vertical installation, there should be vertical pressure support in two sides pipeline joints in case of pulling off when bearing pressure.
4. The installation position should stay away from heat sources, ozone areas. Radiation, exposure and mediums out of product requirement are strictly prohibited.
5. When transportation, loading and unloading, prevent the surface and sealing face of the rubber joints from scarification by sharp tools.
 |
|