Sell 13.56mhz Rfid Module Jmy504 Nxp Rc522, Rc523

This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

JMY504 series are RFID reader/writer module with UART and IIC serial ports. JMY504 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability.

Qualifications:
PCD: NXP RC522, RC523
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B
Operating distance: 80mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF
EEPROM: 512 Bytes
Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps
Max.command length: 254 Bytes
Interface level: 3.3V(TTL level; 5V tolerance)
Power supply: DC 5.0V
Power consumption: 50mA
Dimension: 42mm*21mm*8mm
Package: DIP32
Weight: about 15g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade
ISP: Supported
RoHS: Compliant