Lexia-3 Pp2000 Leixa3 Citroen/peugeot Tool

Lexia-3 PP2000 PPS is a professional scanner tool for Citroen and Peugeot cars, which not only can read fault code like other scanner tool, but can read identification, auto-scan, measured vales, actuator test, etc.
Update to latest version:Lexia-3: V46, PP2000: V23, Multi-language available.

Lexia-3 Citroen/Peugeot Diagnostic PP2000 PPS Free Shipping
Update to latest version: Lexia-3: V46, PP2000: V23

PP2000/LEXIA-3 Interface latest version, works for both Citroen and Peugeot!

Compatible Vehicles:

♦ Citroen: C1, C2, C3, C4, C6, C8, C-CROSSER, NEMO, BERLINGO, JUMPY, JUMPER, AX, SAXO, BX and so on. But please pay attention, according to our customer's experience; this item cannot work well at C5 models.

♦ Peugeot: Models most from the year 1995, but it cannot work well with Peugeot 307.

♦ If customer has these two types of cars, please pay attention, check with us first before purchase.

Functions:

Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).


Language:

♦ English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungarian, Greek, Czech

The following diagnostic functions are supported:

♦ Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

♦ Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.

♦ Clear fault codes
this function clears all stored fault codes and other diagnostic information.

♦ Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and read all diagnostic fault codes.

♦ Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

♦ Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc...)

♦ Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.

Hardware and software requirements

♦ Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.

♦ If customer requires, we can prepare ready to work PC.

Package includes:

♦ 1pc x Main unit with extension OBD2 cable
♦ 1pc x Long 9pin to USB cable
♦ 1pc x Short 9pin to USB cable
♦ 1pc x OBD2 cable
♦ 1pc x 16pin to Clip Cable
♦ 1pc x Instruction for Installation and Activation DVD for PP2000



Lexia-3 PP2000 Package Specification:

Length:29cm

Width: 22cm

Height: 8cm

Weight: 1300g



FAQ: Frequently Asked Question

Q: Is there any new car models which new lexi-3 software can do?

A: Yes, the Lexia-3 V45 Citroen/Peugeot Diagnostic PP2000 V22.14 adds some new cars as follows:
Peugeot Bipper
Peugeot Boxer III
Peugeot Boxer III minibus
Citroen Nemo
Citroen Jumper III
Citroen Jumper III minibus